How to Fit a Ghost Immobiliser
Are you looking for a way to prevent your car from being stolen? A ghost immobiliser can be a great solution. These devices work silently, and they're incredibly hard to spot.
They are not detectable by radio signals, diagnostics or diagnostics, and they communicate with the ECU via the data loop of CAN. This makes them impossible for thieves to evade by using key relay technology or copying.
The Ghost Immobiliser has been approved by TASSA to be used for insurance purposes.
The Autowatch Ghost immobiliser is a TASSA-verified system that can help to protect your vehicle from theft. It connects to the CAN network and then entering a unique PIN code with factory buttons on your dashboard or the steering wheel. It will not allow the engine to start unless the correct code is entered. It also disables the starter motor, and shut down components like the fuel pump, ensuring that thieves aren't able to steal your vehicle.
A TASSA-certified Ghost immobiliser is a cost-effective way to protect your vehicle. It can also protect against signal relay attacks, which are the most common methods employed by thieves to steal cars. It can also lower insurance premiums up to 20 percent. Besides being effective against hackers The device is also discreet and isn't easily detected by potential thieves. It is compatible with a wide range of vehicles and makes it an ideal option for Birmingham drivers looking to safeguard their vehicles.
It is easy to install and does not require cutting wires or putting in new key fobs. It connects with the vehicle's CAN network and then transmits the inputs directly to the ECU. This means that it is impossible to replace the ECU or to add new key fobs. Additionally the Ghost does not emit radio signals or use diagnostics, so it's undetectable to thieves using scanners.
The Autowatch Ghost immobiliser is the most advanced immobiliser available. It is able to prevent vehicle theft. It's a highly efficient system that sends an encrypted signal to the ECU, preventing the vehicle from starting if the correct PIN isn't entered. It can be programmed to any degree, so you can change the PIN whenever you want. It also has an Anti-Hijack Mode that stops cloning and jamming of signals.
You can also connect the Ghost to a tracker in order to protect your vehicle from theft and other crimes. The tracking system allows you to track your vehicle in real-time and report any suspicious activities to the police. The tracker can be used to track your vehicle if it's stolen or vandalized.
It's simple to install
A ghost system can directly communicate with the ECU of your car, unlike a standard factory-fitted immobiliser that relies on a chip inside your key fob. It is completely undetectable by high-tech diagnostic tools, and it does not rely on radio signals. It shuts down the starter motor or fuel system, stopping your vehicle from beginning.
This will also prevent the ECU accepting any new codes that are entered via the OBD port. ghost immobiliser fitting will prevent thieves from replacing the ECU or acquiring new key fobs in order to steal your pride-and-joy.
It's also impossible to break or override a Ghost system since there are no wires visible or physical anti-theft equipment. This is why it's an effective method of keeping your car safe and secure.
The Autowatch Ghost system is connected to the CAN system of your car and programmed with a unique PIN code push sequence that must be entered before the J can be driven. The system is inaccessible to thieves with high-tech equipment and there are no LEDs to illuminate It is completely silent and operates through the buttons in your car like those on your steering wheel and door panel as well as the central console.
Before you leave at the end of the day, a member of the Tassa registered ghost installation team will give you a thorough demonstration of your system. You will also receive an Owner's Manual along with an Emergency Card, two Autowatch window stickers and an Installation Certificate that comes with security guarantee. The system can be deactivated to allow valet parking or servicing and then activated quickly when it is used again.
It requires low maintenance.
The Ghost Immobiliser can be used in various vehicles. It is easier to install since it doesn't require additional sensors or keyfobs.
It's also lower maintenance than a tracker, as it doesn't transmit RF signals or pulses like a standard GPS unit does. This means thieves cannot utilize code grabbing or RF scanning technology to locate the Ghost Immobiliser. The system operates on the CAN data network, so it can't be tampered with by using standard tools and can only be deactivated by entering the correct PIN code.
To drive away your vehicle the thief needs to be aware of the unique disarming sequence of your Ghost immobiliser. This is a series of button presses on the steering wheel, door panels or centre console. This makes it extremely difficult for them to determine the exact button you press, and can stop the car from starting.
The Ghost Immobiliser also uses a smart phonetag' which is attached to your keys and connects via Bluetooth with the base unit of your car. The tag can be programmed to arm at any time by the user and is activated via an app on your phone when you are within range of your vehicle. You can also activate the system by calling the app to find your vehicle. The app will show your vehicle identification number which is used to protect your car from theft.
The Ghost immobiliser is an ideal option for those who frequently transfer their vehicles to valet parking and maintenance. Our installers will give a thorough demonstration of how the system works and then hand over owner's guides, insurance certificates and an Ghost emergency card at the conclusion of installation.
The Ghost immobiliser can be transferred to a new vehicle in the event that your vehicle is changed in ownership in the event that it is compatible with the Ghost System. This is a convenient feature that will give you peace of mind should you decide to sell your car.
It's incredibly hard to detect
A Ghost Immobiliser stops thieves from getting your car started by requiring a unique PIN code that you only are aware of. This means that they will not be able to drive away with your joy and pride and will instead have to physically take it away. It is possible to work with a car tracker in tracking your vehicle. The device is hidden within the vehicle and doesn't emit any signals from radios or LED indications so it is unrecognisable to thieves. It is discrete and doesn't require additional wiring, so it can be installed without causing harm to your vehicle.
The device is hidden inside the vehicle and works with the onboard CAN data circuit. It communicates with the ECU in the vehicle, and does not rely on the key fobs or any other sensors to function. It is able to stop thieves from infiltrating the system by using the use of a new key or by replacing the ECU. The system cannot start your car if it does not have the proper pin code.
This device was designed by Autowatch which is a South African technology leader. This product is an illustration of how they are leading the way in creating the latest security products. This system guards against most recent smart key technology and contactless technology including cloning, hacking and even key theft.
It is able to do this due to it communicating with the ECU via the vehicle's data bus. It is completely silent and doesn't send any signals, which means it cannot be detected by code-grabbing devices or RF scanners used by high-tech thieves. It also makes use of buttons on your vehicle to input the PIN code, meaning it's not as susceptible to theft as traditional immobiliser relays.
This system is a fantastic option to improve your vehicle's security and give you peace of mind while driving. It's a small price to pay to ensure that you do not have to put your pride and joy through the agony of being robbed. Contact us today to discover how we can help protect your vehicle by using our TASSA-certified Ghost immobiliser.